DSC F1 Projects & Downloads

1973 DSC MOTORSPORTS F1 TEAM



1974 DSC MOTORSPORTS F1 TEAM



1975 DSC MOTORSPORTS F1 TEAM



1976 DSC MOTORSPORTS F1 TEAM



1977 MARINHO F1 TEAM



1975 Matra F1 TEAM



1979 CHEVRON B41



WIP
None


OTHER FILES

F1-Seven Patch V1 (fix small typos within files that were showing up in the Trace files)



CRËW F1-Seven Background Template (template to help with the team design part of the backgrounds.)

It's Tiff!!
"Tonight on Top Gear..."

A LOT done in the last few days. Almost ready to start getting this game-ready.

De Lacrowe wrote:A good job and I like to see sharp texture applied to the car, in general you are using a resolution of 1024x1024
, but in your case it seems that you have used the best size of 2048x2048.

You think you also improve the tires for this car

I tend to use 2048x2048 on the custom cars, i.e the '76 and '77 DSC cars, and the Marinho and Chevron. When I have to make a car from scratch, I may as well use a bigger res image, as it gives a better result.

The helmet, btw, is heavily modified and retextured. That took most of a day's work, I'm glad I don't have to do that again!

The tires will be changed/improved too, the current ones were just placeholders from a '76 March that 'donated' it's non-bodywork parts to this car. I saw the rims Luigi70 made for his Chevron B24/B28, and will see if I can come up with something similar.

Finally in-game. Thanks to Wookey for proving the actual 1979 mod for me to use, I didn't realise I had this missing from my install, (miss not having a race-by-race for this season.)

Seeking advice on moving the animated arms, as they just explode in Zmodeler and 3DSimEd.

dragonsteincole wrote:Seeking advice on moving the animated arms, as they just explode in Zmodeler and 3DSimEd.

In F1C to position the arms you have to put a dummy
string gen. file example:

Spoiler:

put the file 1973dumm3.mts initially at the center and then move it front and behind , until the correct position .

Luigi 70 wrote:

dragonsteincole wrote:Seeking advice on moving the animated arms, as they just explode in Zmodeler and 3DSimEd.

In F1C to position the arms you have to put a dummy
string gen. file example:

Spoiler:

put the file 1973dumm3.mts initially at the center and then move it front and behind , until the correct position .

You know what, in all these years I've NEVER put together what that dummy file was for. Thank you very much for the help.

   

   

Wow ! when I was younger, I knew Chevron did a F1, but never seen a picture of it. Then, I found pictures, and now..;THIS ! Thank you very much dragonsteincole. Good luck for finishing the "in game" tune up. I hope to test it soon