cockpit view

Hi guys!

How on earth can I remove the head in this cockpit view? Many thanks!

Vehicles / Tyrrell / .veh

Eyepoint=(0.000, 0.600, -0.050)
CameraTarget=(0.000, 0.999, 0.150)

0.600, -0.050 = 0.500, -0.150 or
0.999, 0.150 = 0.799, 0.050

Understand ? Try more or less

+ + +

SAVE / default.cfg

LocalCam=COCKPIT
{
Fov=(99.999999, 62.500000)
Clear=TRUE
Color=(164, 218, 249)
ClipPlanes=(0.225000, 500.000000)
LODMultiplier=(1.000000)
MipmapLODBias=(-1.500000)
Size=(1.000000, 1.000000)
Center=(0.500000, 0.500000)
Flags1=(0)
Flags2=(0)
RadiusLimits=(0.000000, 0.000000)
OrientationRate=(35.000000, 35.000000, 25.000000)
PositionOffset=(0.000000, -0.028500, -0.0100000) \\(Left-Right, Up-Down, Back,Forward)
OrientationOffset=(-0.030000, 0.000000, 0.000000)
Radius=(0.000000)
}
LocalCam=TVCOCKPIT
{
Fov=(99.999999, 62.500000)
Clear=TRUE
Color=(0, 0, 0)
ClipPlanes=(0.305000, 500.000000)
LODMultiplier=(1.000000)
MipmapLODBias=(-.600000)
Size=(1.000000, 1.000000)
Center=(0.500000, 0.500000)
Flags1=(0)
Flags2=(0)
RadiusLimits=(0.000000, 0.000000)
OrientationRate=(35.000000, 35.000000, 25.000000)
PositionOffset=(-0.000000, 0.288553, 0.2950790) \\(Left-Right, Up-Down, Back,Forward)
OrientationOffset=(-0.068662, -0.002000, 0.001304)
Radius=(0.000000)
}

Remove... without head

Vehicles / Tyrrell / .gen

Instance=HELMET
{
Moveable=True
<SPIN> MeshFile=SCHECKTER34HELMA.mts CollTarget=False HATTarget=False LODIn=(0.0) LODOut=(20.0)
<LOW> MeshFile=SCHECKTER34HELMA.mts CollTarget=False HATTarget=False LODIn=(0.0) LODOut=(65.0)
<MED> MeshFile=SCHECKTER34HELMA.mts CollTarget=False HATTarget=False LODIn=(0.0) LODOut=(1.0)
<MED> MeshFile=SCHECKTER34HELMA.mts CollTarget=False HATTarget=False LODIn=(1.0) LODOut=(85.0)
<HIGH> MeshFile=SCHECKTER34HELMA.mts CollTarget=False HATTarget=False LODIn=(0.0) LODOut=(3.0)
<HIGH> MeshFile=SCHECKTER34HELMA.mts CollTarget=False HATTarget=False LODIn=(3.0) LODOut=(100.0)
<MAX> MeshFile=SCHECKTER34HELMA.mts CollTarget=False HATTarget=False LODIn=(0.0) LODOut=(5.0)
<MAX> MeshFile=SCHECKTER34HELMA.mts CollTarget=False HATTarget=False LODIn=(5.0) LODOut=(120.0)
}

Deleted that lines

it worked, i mean the change in the .veh files! thank you so much!