1991 Phoenix AIW problem

hello mates,
I need help of AIW-Editor Specialists.

I have a Phoenix of 1991 and the cars crashing by qualifying at the Pit-entrance.
I t could be impossible to drive the race with a pit-stop strategy.

Please helt to fix it.

thanks.
HERE IS THE AIW 1991 PHOENIX:
https://filebin.net/ymco99zvga2tfili

F1CDriver wrote:hello mates,
I need help of AIW-Editor Specialists.

I have a Phoenix of 1991 and the cars crashing by qualifying at the Pit-entrance.
I t could be impossible to drive the race with a pit-stop strategy.

Please helt to fix it.

thanks.
HERE IS THE AIW 1991 PHOENIX:
https://filebin.net/ymco99zvga2tfili

I hope CMT has this fixed in their August release, but with an Alpha version...

I solved this little problem by removing the tire barriers at the entrance to the pit.




There is another problem, which are irregularities in some parts of the circuit, where the manhole covers are. These irregularities cause AIs to run much slower than normal even if the AI Driver Strength is set to its maximum (120%). I don't know how to resolve this.    I don't know if anyone solved it.  

I put pit speed limit to mitigate this problem.

The second problem I managed to solve.
I deleted the manhole line in the SCN file and eliminated the problem.
The track is without this detail and the AIs go faster.

cecelo wrote:The second problem I managed to solve.
I deleted the manhole line in the SCN file and eliminated the problem.
The track is without this detail and the AIs go faster.

could you send a screenshot which line did you delete?
I want to try it. ;-)

Hi F1CDriver,
Before making a backup of the circuit's SCN file.
Open the SCN with notepad and look for that line that is wrapped in red and delete it.

cecelo wrote:Hi F1CDriver,
Before making a backup of the circuit's SCN file.
Open the SCN with notepad and look for that line that is wrapped in red and delete it.

it didnt work out, mate

now it looks  like this:

Instance=p1g20002-b
{
MeshFile=p1g20002-b.mts CollTarget=True HATTarget=True ShadowReceiver=True
Response=VEHICLE,TERRAIN
}
Instance=p1g30001-b
{
MeshFile=p1g30001-b.mts CollTarget=True HATTarget=True ShadowReceiver=True
Response=VEHICLE,TERRAIN
}
Instance=trackjef
{
MeshFile=trackjef.mts CollTarget=True HATTarget=True ShadowReceiver=True
Response=VEHICLE,TERRAIN
}
Instance=loyt
{
MeshFile=loyt.mts CollTarget=True HATTarget=True ShadowReceiver=True
Response=VEHICLE,TERRAIN
}
Instance=pitlan
{
MeshFile=pitlan.mts CollTarget=True HATTarget=True ShadowReceiver=True
Response=VEHICLE,TERRAIN

Hi F1CDriver,
This print I posted is of the manholes on the track.

To remove the tire barriers at the entrance to the pitlane you have to erase these two lines more.

cecelo wrote:Hi F1CDriver,
This print I posted is of the manholes on the track.      

To remove the tire barriers at the entrance to the pitlane you have to erase these two lines more.

Perfect!  Thank you so much, mate! It worked out.